End Feed Bent Tap Connector

End Feed Bent Tap Connector

• Description：End Feed Bent And Straight Cylinder Union,Bent Tap Connector,Straight Tap connector, Bent Tap connector with WRAS,SABS approval.
  The solder confirmed SN99.3CU0.7.Actually,the lead of the solder in Runde is lower than 0.01%.Much lower than other suppliers.And our solder ring inside the socket are smooth.There has no bubble hole inside.
  end Feed Fittings also know as copper fittings or Capillary fittings are tradtionally used fittings in the plumbing industry to join copper pipes on all hot and cold water systems. From copper elbows, tees, sockets to endfeed tap connectors every fitting you require is available in endfeed. in many sizes from 8mm - 54mm
  The Copper fittings known as copper pipe fittings ,copper pressure fittings and copper plumbing fittings, divided to End Feed Copper Fittings(wrot joint copper fittings ) and solder ring copper fittings(presolder copper fittings).And the  quality of our EN1254-1 copper fittings can compare with yorkshire copper fittings( pegler copper fittings ) and connex copper fittings .our ASME B16.22 copper fittings also has exported to Mueller in U.S. Our end feed bent tap connecto are produced according to EN1254-1 ,We have solder ring type too.It is widely used in pipeline for water and gas.
  

• Production Standard: 
  1.EN1254-1:1998/BS864-2(Copper And Copper Alloys-Plumbing Fittings)

• Material:   
  Copper Part: 
  C12200(Cu-DHP CW024A ，SF-Cu 2.0090 and TP2)
  Cu≥99.95% P0.015%-0.04% Impurity(P,Ag,Bi,Sb,As,Fe,Pb,Sn,S,Zn)≤0.1
  Brass Part:   
  1.HPb59-1(Cu57-60% Al≤0.2% Fe≤0.5% Pb 0.8-1.9% Sb≤0.01% Bi≤0.003% P≤0.02% Zn balance)
  2.CuZn39Pb1Al-C(CC754S)(Cu58-62% Sn≤1% Al0.1-0.8% Fe≤0.7% Pb 0.5-2.4% Ni≤1% Mn≤0.5% P≤0.02% Si≤0.05% Zn balance)
  3.DZR602(CuZn36Pb2As-CW602N)(Cu60-63% Sn≤0.3% Al0.3-0.5% Fe≤0.3% Pb 1-2.5% As 0.08-0.15% Zn balance)

• Application: Industrial or Residential Water and plumbing,drinking supply,cold and hot water supply, heating supply, fire protection.